Getting started
New Install
User Onboarding
DownloadsReference
Roles
Features
Interfaces
ActionsGuides
Premiere Pro/w=3840,quality=90,fit=scale-down){kind=icon}
DaVinci Resolve
Final Cut Pro
Media ComposerDirect Connect
Connect to the node directly to your computer without a switch or router.
You will need:
Quantity | Item |
1 | ethernet cable |
Step 1 - Connect the node to your computer
Once you have turned the node on, connect it to your computer with an ethernet cable. Plug one end of the ethernet cable into your computer, and the other end into the port on the back of the node based on the instructions provided by DigitalGlue for your specific system.
If your computer does not have an ethernet port, you can use a USB 3 to 1000Base-T Ethernet adapter to connect it to your node.
Do not use a 10Base-T or 100Base-TX adapter to connect to the node. These adapters might not work.
Each node has an ethernet port that is reserved for hardware diagnostics. Do not connect to this port unless a creative.space support technician specifically instructs you to do so.
Step 2 - Log into the web app
Every creative.space node has a management interface that you can access with your web browser. Navigate to creativespace.local to access it. Then, log in with the administrator credentials you received along with the node.
If your node was pre-configured by creative.space support, then you might need to go to a different URL to access it. Contact contact creative.space support if you need assistance connecting to your node.
← Previous
Next →