Getting started
New Install
User Onboarding
DownloadsReference
Roles
Features
Interfaces
ActionsGuides
Premiere Pro/w=48,quality=90,fit=scale-down){kind=icon}
DaVinci Resolve
Final Cut Pro
Media ComposerTurn On the Node
Your creative.space node is designed to run for years at a time, without turning off or rebooting. However, you need to follow these steps to ensure that it can do so.
Step 1 - Place the node in a cool, dry location
When setting up your creative.space node, it's important to consider its placement for optimal performance and longevity.
Recommendations for node placement:
- ✅ On an elevated surface, like the top of a shelf, or in a server rack. ❌ Never on the floor.
- ✅ In a climate-controlled environment. ❌ Never outdoors.
- ✅ Upright. ❌ Never sideways or upside down.
- ✅ On a level and even surface. ❌ Never on an uneven or slanting surface.
- ✅ In a place with unobstructed airflow, such as on the top of a shelf. ❌ Never in a location that obstructs its intake or exhaust fans, such as inside a cabinet.
Step 2 - Connect the node to an uninterrupted power supply (UPS)
The node needs uninterrupted access to power. Although it will protect your data in the event of a sudden power loss, it might not be able to protect itself from damage. To avoid sudden power loss, do not plug it directly into a wall socket. Instead, plug it into a UPS. In the event of a power outage at your facility, the UPS will signal the node to shut down, and will continue to provide power until it does.
Make sure the UPS can support the power requirements of the node.
The creative.space Node models have different power requirements and need to be connected to the provided UPS.
- Power Sockets: 1 x C13
- Amperage Draw and AC Input: 5 Amps, 100 - 240v 50 - 60hz
- Maximum Power Consumption: 250 Watts
- UPS Required: No
- Power Sockets: 2 x C13
- Amperage Draw and AC Input:
- 10 Amps, 100 - 127v 50hz or 60hz
- 8 Amps, 200 - 240v 50hz or 60hz
- Maximum Power Consumption: UPS Required
- UPS Required: Yes
- Power Sockets: 2 x C13
- Amperage Draw and AC Input:
- 12 Amps, 100 - 120v 50hz or 60hz
- 8 Amps, 200 - 240v 50hz or 60hz
- Maximum Power Consumption: UPS Required
- UPS Required: Yes
- Power Sockets: 2 x C13
- Amperage Draw and AC Input: 12 Amps, 200 - 240v 50hz or 60hz
- Maximum Power Consumption: UPS Required
- UPS Required: Yes
Please ensure that you connect your creative.space Node to the provided UPS to ensure proper power supply and protection.
Connect your UPS's data port to the node.
Most UPS's can send a shutdown signal to the node in the event of a power failure. Upon receiving the shutdown signal, the node will stop operating and safely power off. To send the shutdown signal to the node, the UPS's data port must be connected to the node. Consult your UPS's instructions on how to set up this connection.
Do not overload your facility's circuit breaker.
Most residential circuit breakers trip if more than 15 amps are drawn from a single circuit. Although none of the creative.space nodes draw 15 amps, they do draw up to 12 amps, leaving as little as 3 amps available for other appliances. It is very easy to plug in another appliance, such as another server, a workstation, a lighting grid, or even a microwave, and overload the circuit. Consider plugging the node into a separate circuit.
Keep in mind that an uninterrupted power supply only stores enough power to keep your node running for a few minutes - just enough time for it to shut down.
Step 3 - Turn the Node On
After you plug in the node, press its power button to turn it on.
Keep in mind that the node will not display the same start up sequence as a Windows or Mac desktop operating system. Instead, you will hear its case fans spin up, and see the indicators on each of the drive bays start to flash.
The node can take up to 15 minutes to fully boot up. This is because it verifies that all of the components within it are functioning properly during the boot up process. This improves reliablity, and helps to prevent data loss. If you'd like, you can monitor the boot up process by plugging a VGA monitor into the VGA port on the back of the node.
If the node freezes for longer than 15 minutes during boot up, do NOT press and hold the power button to turn it off. Instead, press the reset button to re-start the boot up process. If the node freezes again in the same spot, contact creative.space support, and ask for further assistance.
Do NOT attempt to open the node's case and fix the parts inside it.
How can I tell if the node is powered on?
All creative.space nodes have indicator lights for the following:
- Power
- Drive
- Network
- Information
Different models place these lights in different locations on the front of the node.
An indicator light can either be off, blinking, or solid.
Some indicator lights change color. Typical colors for indicator lights are blue, red, green, or yellow.
Node State | Power | Drive | Network | Information |
Connected to power source | Blinking Yellow | Off | Off | Off |
Connected to a network and a power source, but not on | Blinking Yellow | Solid Yellow or Green | Off | |
On and can detect a network connection | Solid Yellow | Solid or Blinking Blue | Solid or Blinking Yellow or Green | Off |
On, but cannot detect a network connection | Solid Yellow | Solid or Blinking Blue | Off | Off |
Overheating, or power supply, fan or other component has failed | Solid or Blinking Red |
Node State | Power | Drive | Network | Information |
Connected to power source | Solid Yellow | Off | Off | Off |
Connected to a network and a power source, but not on | Solid Yellow | Off | Blinking Green | Off |
On and can detect a network connection | Solid Green | Solid or Blinking Blue | Blinking Green | Off |
On, but cannot detect a network connection | Solid Green | Solid or Blinking Blue | Off | Off |
Overheating, or power supply, fan or other component has failed | Solid or Blinking Red |
Node State | Power | Drive | Network | Information |
Connected to power source | Solid Yellow | Off | Off | Off |
Connected to a network and a power source, but not on | Solid Yellow | Off | Blinking Green | Off |
On and can detect a network connection | Solid Green | Solid or Blinking Blue | Blinking Green | Off |
On, but cannot detect a network connection | Solid Green | Solid or Blinking Blue | Off | Off |
Overheating, or power supply, fan or other component has failed | Solid or Blinking Red |
Node State | Power | Drive | Network | Information |
On and can detect a network connection | Solid Green | Solid or Blinking Yellow | Blinking Green | Off |
On, but cannot detect a network connection | Solid Yellow | Solid or Blinking Yellow | Off | |
Overheating, or power supply, fan or other component has failed | Solid or Blinking Red |
Node State | Power | Drive | Network | Information |
Connected to power source | Blinking Yellow | Off | Off | Off |
Connected to a network and a power source, but not on | Blinking Yellow | Off | Blinking Green | Off |
On and can detect a network connection | Solid Yellow | Blinking Green | Blinking Green | Off |
On, but cannot detect a network connection | Solid Yellow | Blinking Green | Off | Off |
Overheating, or power supply, fan or other component has failed | Solid or Blinking Red |